Twin Matrix Anomaly

The Matrix Project Search Words and Codes

New updates and installs usually set the Gage Matrix  as the default, but it appears something happens after an update is performed that might prevent the full engagement of the Matrix choice causing a “twin matrix” issue.

This is how you can currently identify if this issue is present on your system.  Are there items repeating in the  Hyper-Reactants training program or are those items different from those listed in the Allersode sub file list?  If you perform a search using the name of a high reactive item on the matrix but in the search results a different value shows for it compared to the value that it was displaying on the current EPR matrix results.  When this happens the search is actually showing the opposing matrix (Nelson or Gage) for that same item.  This proves your program is encountering the “twin matrix” issue and you will need to follow a few simple steps to correct it.  If you want to use the Nelson Matrix the databases may not sync properly.  You will have to engage the test but in an opposite way to see if you are getting the same results in all parts of the software Hyper Reactants program and Main Matrix results.

HINT: If you don’t know which Matrix you are currently viewing for your matrix list, you can do this.

1. Do an item number search using “Go to No” to see if the matrix is confused [wink].
2. Search for item  # 2777 CONFUSION | This imponderable homeopathic reacts from excess or suppression. ~I.Q.
3. If that is what you see on the line, this represents the GT matrix item with the code at the end.
4. If you see “CONFUSION | This imponderable homeopathic reacts from excess or suppression.”   This one represents the Nelson matrix because it doesn’t have the code at the end.

The following instructions explain how to fully engage the matrix of your choice (Nelson or Gage) after a program update. 

To “Fully Engage” the GT Matrix.

1. Open the program, load a test client go to Calibrate and then just use the red X in the top right and close.
2. Go to the Main Matrix, close both panels that overlay the Matrix.
3. On the main menu bar click on “Order of Remedies”, you should see at the bottom of the drop down list, “Nelson matrix activation” (this indicates Gage’s matrix is already “Fully Engaged” and active) or if you see “GT matrix activation” and you thought you were already using the GT matrix (you see and recognize the codes at the end of the signature line) this is a sure sign that the GT matrix did not get “Fully Engaged” and needs to be reset.
4. On the main menu bar click on “Order of Remedies”
5. Click on “GT matrix activation”.
6. Now, close out of the program, power off your INDIGO device.  Then shut down and power off your laptop.   This must be done in order to set the “matrix” you have chosen.
7. Now when you power up your laptop and it finishes loading and is at the desktop, power on your INDIGO device.  Once the device has the “Welcome to INDIGO” and has played its chime you can now open your INDIGO program and run a “test” client and all should be working perfectly again.  After you calibrate and run a new EPR Test, you can quickly check by running a search for an item.  Check to make sure it represents the current EPR value of that item on the matrix.  You must use the name of the item not search by #.

OR…….

 To “Fully Engage” the Nelson Matrix.

1. Open the program, load a test client go to Calibrate and then just use the red X in the top right and close.
2. Go to the Main Matrix, close both panels that overlay the matrix.
3. On the main menu bar click on “Order of Remedies”, you should see at the bottom of the drop down list, “GT matrix activation” (this usually indicates the Nelson matrix is currently active) but if you have done an update and are noticing the Hyper reactants are giving repeating results or if you do a search by item for example the word Confusion and you see the ~ I.Q. there is a cross over happening.
4. Click on “GT matrix activation”.
5. On the main menu bar click on “Order of Remedies”  again.
6. Click on “Nelson matrix activation”.
7. Now, close out of the program, power off your INDIGO device.  Then shut down and power off your laptop.  This must be done in order to set the “matrix” you have chosen.
8. Now when you power up your laptop and it finishes loading and is at the desktop, power on your INDIGO device.  Once the device has the “Welcome to INDIGO” and has played its tune you can now open your INDIGO program and run a “test” client and all should be working perfectly again.  After you calibrate and run a new EPR Test, you can quickly check by running a search for an item by name.  Check to make sure it represents the same current EPR Test value.

Susan Harms support@quantumworldvision.com
Mon-Fri 8-4 MST
800-388-2033 ext 1
To Get Remote Help:

Download;  TeamViewer