You are here:

HomeHow to use it
How to use it


Use the button to switch on the device. Press it firmly for a second or two to start the operation. If the power adaptor is connected first, the device turns on automatically, and then switches off.

If the power adaptor is already connected, the device automatically selects the electrical supply as its source of power.


Press the button firmly for 3 to 4 seconds to switch off the device. In case the device is connected to the power adapter, it remains operational even after it is switched off.

If you leave the power adaptor connected to the device, then it automatically starts recharging once the device is switched off, and the battery level drops below 80%. The battery recharge process can be interrupted at any time by switching on the device. Please note that it is not possible to recharge the battery while you are also using the device.

Usage menu option

  1. Once you switch on the device the main menu is displayed.

  2. Select the ‘Usage’ menu option (‘+/-’ buttons).

  3. Enter the ’Usage’ menu option (‘M’ button).

  4. Select a crystal type (‘+/-’ buttons).

  5. Confirm the selected crystal type (‘M’ button).

  6. Select the proper illumination light colour for the operation (‘+/-’ buttons).

  7. Confirm the selected colour (‘M’ button).

  8. Set the length of use. You can advance in terms of minutes (‘+/-’ buttons).

  9. Start the operation for the length of time set (‘M’ button).

The device only switches on the light source if the appropriate crystal adaptor has been placed at the proper spot on the main unit.
Otherwise, the device waits for one minute for the crystal adapter to be put in place. If it does not detect a crystal adaptor in place during this time, the device interrupts the operation and reverts to the selection of the crystal type in the menu system.

If it detects a crystal adapter on the main unit, the device starts to illuminate the crystal, and the display shows the countdown from the point of time set. Once the set time period has elapsed, the device gives off a signal and reverts to the crystal selection menu option in the menu system in order for a new cycle of operation to be started.

Settings menu options


The CRYXON® Crystal Light Therapy includes a standard built-in multi-lingual menu system. In practice this means that using the “Languages” menu, you can, set the menu system to any one of the 14 available languages at any time. The device stores the selected setting in its memory, therefore, it will use the same language from this point going forward.

Figure 3 shows a list of the supported languages under the “Languages” menu option.

When the device is first switched on, the “Languages” menu pops up immediately, making sure that its users can begin instant operation.
By default, the menu system is displayed in Hungarian language at first.
Each language appears on the list with the right wording and characters appropriate for the particular language, therefore, the users of each language can quickly and easily identify the right menu option for their chosen language.

Important: Once you have selected and confirmed your chosen language (‘M’ button), the device restarts automatically and displays the menu system, which corresponds to the set language. From that point on, the device will communicate using this selected language.

Default settings

By selecting this menu you can restore your device to the manufacturer’s default settings.
The device will switch off after you confirm your choice by pressing the ‘+’ button. When the device is next switched on, the language selection menu is displayed again first.
You can cancel this option by pressing the ‘-’ button.


The test menu offers the following options:

You can interrupt the test process by pressing the button. Once the full series of tests has been completed, the device switches to the main menu automatically.